C-frame 65 T high speed mechanical punch press

Mechanical punch press

Specification:

1.Three-circle guiding post cinstruction:

Using three-circle guiding post cinstruction(2 guide column, 1 plunger structure),can minimize the motion friction, running for 24 hours, minimize the heat extent, but the accutacy can up to the highest value and extend the life of mould.

2.Multifunctional contact control style screen: 

Using multifunctional contact control style screen, indicate in chinese and english characters, no need of proficient operation, with its overall function, it is operated well by common workers. The information for angle, totation speed and fault of the lathe can be displayed on the screen, and can operate safely.

3. Airframe:

Airframe materials is made from high-strength ductile iron which are casted the elimination of internal stress, after a period of continuous operation of the machine, our machine will not change the mechanical properties and can ensure long-term accuracy of the machine.

4.counter-side load dynamic balance: 

With the counter-side load dynamic balance, based on the vibration which occurred during the high speed running and rotating of the balancing crack shaft and sliding block, to control the accuracy of bottom stop.

5.height of mould: 

Manually to adjust the height of mould, easily to operate.

6.Germany spring steel bearing:

All the bearings use the best Germany spring steel bearing, has stable accuracy, to ensure the good performance of the machine rack.

Standard Accessories: